WhipMix SinterPro Sintering Furnace
Product Description
Condition: Brand New
Warranty: 2 Years Global Warranty
Payment method: Crypto Currency,Bank to Bank Transfer,Western Union,Credit Card(Limited),Ria Transfer,Money Gram,e.t.c
Delivery method: 4 to 5 working days (door to door delivery).
Specification:
Electrical Power Requirements:
#96553 16 Amp Model: 208 – 240 VOLT 50/60Hz Single
Phase, 16 Amps, 3680 Watts
#96550 20 Amp Model: 200 – 240 VOLT 50/60 Hz Single
Phase, 20 Amps, 4600 Watts
Overall Dimensions: 17" (43.2 cm) Wide × 25.5" (65cm) Deep ×
33.24" (84.5 cm) High
Heating Chamber Dimensions: 3.5" ( 9 cm) Diameter × 6.5" (16.5 cm) High
Oven Weight: 132 Lbs. (60.0 kg)
Shipping Weight: 191 Lbs. (86.6 kg)
Maximum Temperature: 1570°C (2858°F)
Number of Programs: 30 Programs 1-2 are pre-programmed with Vericore Zirconia fast and slow sintering cycles.
Number of Stages/Program: 1 – 4, User defined.
Delay Start: 0 – 8.0 hours
HVAC Load: 15,710 BTU/Hour (20 amp unit)
12,568 BTU/Hour (16 amp unit)
Maximum Heat Rate*: 1 – 54°F/min. (1 – 30°C/min.
- MULTIPLE PROGRAMS, MULTI-STAGE SINTERING – 30 user-defined programs and four stage sintering allow for optimization of firing programs.
- HIGH DENSITY PAYLOAD CAPACITY – Two trays with different heights give the furnace capacity real versatility. Use a shallow tray for basic single units and short span bridges, the deep tray for large conventional and Prettau Bridges.
- REDUCED AMPERAGE REQUIREMENTS – The low 16-20 amp draw requirement (depending on what country you live in) means you will most likely not require custom electrical modifications.
- POWER FAIL RECOVERY – If the power browns out or blacks out for a short time, especially at night when unattended, the oven will automatically resume the firing cycle at the stage where power failed.
- SAFETY – Alarm card safeties/failsafes. The oven is UL safety certified to the UL 61010 standard which means you can be assured that an independent testing lab has
confirmed the unit will fail safe. Look around. How many other ovens carry safety certification? (Hint: we see very few!). Idle/Preheat automatically raises the lift if no keys have been pressed for an hour and applies just enough power to keep the muffle between 100° and 200°F. This keeps the muffle from accumulating moisture which can turn into steam on the next run and cause insulation cracks. - ACCURACY – Like all Whip Mix ovens, the unit is calibrated to +/- 3˚ C tolerance specification. 1550°C max sustained temperature is ideal for sintering zirconia
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!