Roland DWX-4W Wet 4-Axis Dental Milling Machine
Product Description
Condition: Brand New
Warranty: 2 Years Global Warranty
Payment method: Crypto Currency,Bank to Bank Transfer,Western Union,Credit Card(Limited),Ria Transfer,Money Gram,e.t.c
Delivery method: 4 to 5 working days (door to door delivery).
Specification:
| Cuttable material | Glass ceramics, Composite resin | |
| Loadable workpiece shape | Width | Maximum 40 mm (1.57 in) |
| Depth | Maximum 20 mm (0.79 in) | |
| Height | Maximum 20 mm (0.79 in) | |
| Operating speed | 6 to 1,800 mm/min. (0.24 to 70.9 in./min.) | |
| Spindle motor | Jaeger high frequency spindle | |
| Spindle speed | 15,000 to 60,000 rpm | |
| Rotary axis travel angle | A axis | ± 360° |
| Number of burs housed | 4 | |
| Attachable bur | Shank diameter | 3 mm Dedicated milling bur for wet grinding |
| Compatible compressed air* | Pressure | 0.7 to 1.0MPA (101-145psi) |
| Air Capacity | 114L/min (30gal) or more | |
| Tank Capacity | 33L (8.7gal) or more | |
| Interface | USB | |
| Control command set | RML-1, NC code | |
| Power requirements | AC 100 to 240 V ± 10%, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1) | |
| Power consumption | Approx. 200 W | |
| Operating noise | During operation | 70 dB (A) or less (when not milling) |
| During standby | 48 dB (A) or less | |
| External dimensions | Width x Depth x Height | 480 x 538 x 599 mm (18.9 x 21.2 x 23.6 in.) |
| Weight | 53 kg (116.8 lbs.) | |
| Installation environment | Indoor use, Altitude | Up to 2,000 m (6,562 ft.) |
| Temperature | 5 to 28 °C (41 to 82.4 F) | |
| Relative humidity | 35 to 80 % (no condensation) | |
| Ambient pollution degree | 2 (as specified by IEC 60664-1) | |
| Short-term temporary overvoltage | 1,440 V | |
| Long-term temporary overvoltage | 490 V | |
| Included items | Power cord, USB cable, Drain hoses, Detection pin, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit | |
| System requirements for USB connection | Operating system | Windows® 7/8/8.1/10 (32 or 64 bit) |
| USB cable | Use the included USB cable | |
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!